Luminex 100 IS 2.1 User Installation Guide User Manual download pdf

PN 89-00002-00-105 Rev. A 1

Luminex® 100™ IS 2.1 User Manual

Installation Guide

Follow these instructions to install the Luminex 100 IS Version 2.1 user manual

from the user manual CD provided with this document.

Overview The Luminex 100 IS User Manual and the Luminex 100 IS

Developer Workbench Guide are provided on a CD in electronic

form as PDF files. These files are viewed using Adobe

® Reader®,

which is provided on the CD. Available translations are also included

on the CD.

• If you are just updating the documentation on an existing

(previously installed) PC or laptop, continue with the section

“Install User Manual from CD” on page 5.

• If this is a new system installation, you have to first connect the

system components using the following brief instructions, then

install the documentation. Note that the complete system

installation instructions are provided in the user manual that is

loaded from the CD. Continue with the following “Luminex 100

IS System Hardware Setup” section.

Contact Luminex Technical Support if you have any problems with

the setup. Refer to “Luminex Technical Support” on page 6 for

details.

Luminex 100 IS

System Hardware

Setup

Before connecting the system components, ensure that the facility

complies with all system and safety requirements. For system

specifications, refer to “Luminex 100 IS System Specifications” on

page 7. Position the instrument to minimize temperature fluctuations.

Figure 1 shows placement of the system components. The following

sections describe how to connect the Luminex 100 IS system

hardware components and install the documentation:

1. “Connect System Components” on page 2

2. “Power On PC Components” on page 5

3. “Install User Manual from CD” on page 5

Note: Hardcopy versions of

the user manual may be

ordered through the Luminex

website or the Luminex Order

desk.

Note: Installing the user

manual on a new system

requires that the system be

setup (connected) before

installing the user manual.

1 2 3 4 5 6 7 8 9 10

Summary of Contents

Page 1 - Installation Guide

PN 89-00002-00-105 Rev. A 1Luminex® 100™ IS 2.1 User Manual Installation GuideFollow these instructions to install the Luminex 100 IS Version 2.1 use

Page 2 - Components

Luminex 100 IS 2.1 User Manual Installation Guide xMAP Technology10 PN 89-00002-00-105 Rev. AIsometric View Right Side ViewLuminex SD19.55 lb. (8.89

Page 3 - PN 89-00002-00-105 Rev.A 3

Luminex 100 IS 2.1 User Manual Installation Guide xMAP Technology2 PN 89-00002-00-105 Rev. A Figure 1 Luminex 100 IS System SetupConnect System Com

Page 4 - 4 PN 89-00002-00-105 Rev. A

xMAP Technology Luminex 100 IS System Hardware SetupPN 89-00002-00-105 Rev.A 34. Remove the red shipping pin from the XYP instrument. Leave the silver

Page 5 - Install User Manual

Luminex 100 IS 2.1 User Manual Installation Guide xMAP Technology4 PN 89-00002-00-105 Rev. AFigure 4 Luminex 100 IS Connections (Luminex 100 analyz

Page 6 - Protecting Your

xMAP Technology Install User Manual from CDPN 89-00002-00-105 Rev.A 5.Figure 5 Connecting the PC, Mouse, Barcode Reader, and Keyboard Power On PC Co

Page 7 - Specifications

Luminex 100 IS 2.1 User Manual Installation Guide xMAP Technology6 PN 89-00002-00-105 Rev. A4. On the desktop, double-click on the Luminex 100 IS Use

Page 8 - 8 PN 89-00002-00-105 Rev. A

xMAP Technology Luminex 100 IS System SpecificationsPN 89-00002-00-105 Rev.A 7UninterruptiblePower Supply(UPS)Luminex highly recommends using an unint

Page 9

Luminex 100 IS 2.1 User Manual Installation Guide xMAP Technology8 PN 89-00002-00-105 Rev. A• Weight: 15 kg (33 lbs.)• UL installation category: UL I

Page 10 - Installation Drawing

xMAP Technology Luminex 100 IS System SpecificationsPN 89-00002-00-105 Rev.A 9• Reservoir•Shield•Heater block• Sheath fluid container• Waste container