Luminex FLEXMAP 3D User Manual User Manual download pdf (Page 27)

FIGURE 12.

Fluidics Bay

1 Sheath filter

2 Blue tubing attached to sheath fluid container

3 Orange tubing attached to waste fluid container

Waste Fluid Container

The waste fluid container receives waste from the system. To maintain a stable flow rate, do

not move the waste line or container during system operation and make certain the waste

fluid container is properly vented. Place the container at least three feet below the surface on

which the instrument rests. You can place it as far away from the instrument as the tubing

allows. Never place it on top of the instrument. Refer to safety instructions for the waste fluid

container within the Fluidics section of the manual.

WARNING: Wear appropriate personal protective equipment when handling

parts that come into contact with potentially biohazardous

samples.

Mechanics

The mechanical subsystem of the

Luminex

FLEXMAP 3D

instrument includes a filter

system.

Replaceable ventilation filters clean the air used to cool the instrument and pressurize sheath

fluid. The four filters must be checked and cleaned as prescribed in the Maintenance chapter

For research use only. Not for use in diagnostic procedures.

Technical Overview

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 85 86

No comments

Luminex FLEXMAP 3D User Manual User Manual Page 27