Luminex FLEXMAP 3D User Manual User Manual download pdf (Page 34)

Electronics

USB 2.0-compatible communications link for fast data transfer

Input voltage range: 100-120 V~, 6.0 A, 50/60 Hz or, 200-240 V~, 3.0 A, 50-60 Hz

Optics

Reporter channel detection: A/D resolution 16 bits

Reporter channel dynamic

range:

≥ 4.5 decades of detection (verified with beads dyed with high levels

of organic dyes)

Reporter laser: 532 nm, nominal output 15.0+5%/-0% mW, diode-pumped; mode of

operation, continuous wave (CW); maximum output power 50 mW

Classification laser: 638 nm, nominal output 12.0 to 12.5 mW, diode; mode of operation,

continuous wave (CW); maximum output power 15 mW

Reporter detector: Photomultiplier tube, detection bandwidth of 565 to 585 nm

Classification detector: Avalanche photo diodes with temperature compensation

Doublet discrimination

detector:

Avalanche photo diodes with temperature compensation

Fluidics

Cuvette: 200 micron square flow channel

Sample injection rate: 2μL/second

Sample uptake volume: 20 to 200μL

Sheath flow rate: 7.9 (+/- 0.9) mL/min

Sheath pressure: 8 to 13 psi for normal operations; 15 psi maximum

Microspheres

Distinguishes 1 to 500 unique xMAP microspheres in a single sample

Classification of xMAP

microspheres:

≥ 80%

Total system

misclassification of xMap

microspheres:

≤ 4%

Internal sample carryover: < 1.5%

Detects a minimum of 500 fluorochromes of phycoerythrin (PE) per xMAP microsphere

Luminex

FLEXMAP 3D

Hardware User Manual

For research use only. Not for use

in diagnostic procedures.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 85 86

No comments

Luminex FLEXMAP 3D User Manual User Manual Page 34