Luminex FLEXMAP 3D User Manual User Manual download pdf (Page 54)

Power Supply Problems

Power supply problems often involve a blown fuse, faulty electronic component, or

disconnected cable.

CAUTION: Whenever you deal with a potential electrical problem, be careful

to avoid electrical shocks.

TABLE 1.

Power Supply Problems

Symptom Possible cause Solution

The Luminex

FLEXMAP 3D

instrument will not turn on.

The power cord is disconnected. Plug in the power cord.

No voltage is coming from the electrical

outlet.

Verify that the electrical outlet is

operational.

The power supply is faulty. Contact Technical Support.

A fuse has burned out See the section titled Replacing Fuses.

Use extreme care when replacing a fuse.

Fuses continue to open (blow). A component has a short circuit. Contact Technical Support.

Communication Problems

Communication problems described in this section involve the links between the data system

(PC and software) and the

Luminex

FLEXMAP 3D

instrument. This section does not

address communication issues with other peripheral devices.

“Communication” refers to the transfer of data between the PC and the FLEXMAP 3D

instrument, including the current status of the instrument, instrument control, sample

acquisition, session uploading, and start, stop, and pause features.

TABLE 2.

Communication Problems

Symptom Possible cause Solution

The PC cannot establish

communication with the

FLEXMAP 3D

instrument.

The communication cable is unplugged or

plugged into the wrong port.

Plug in or move the communications cable.

The FLEXMAP 3D

instrument is not

turned on.

Turn off the PC. Turn on the FLEXMAP

instrument and then turn on the PC.

Luminex

FLEXMAP 3D

Hardware User Manual

For research use only. Not for use

in diagnostic procedures.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 85 86

Comments to this Manuals

No comments

Luminex FLEXMAP 3D User Manual User Manual Page 54

Comments to this Manuals

Related products and manuals for Equipment Luminex FLEXMAP 3D User Manual