Luminex FLEXMAP 3D User Manual User Manual download pdf (Page 39)

WARNING: Do not move the waste line vertically while the FLEXMAP 3D

instrument is running.

Contact Luminex Technical Support before relocating the waste fluid container or rerouting

the waste line. You can move the line temporarily for cleaning and maintenance.

To empty the waste fluid container:

1. Disconnect the waste fluid container from the FLEXMAP 3D

instrument.

2. Discard the waste from the waste fluid container in accord with all local, state, federal,

and country specific biohazard handling regulations.

WARNING: Waste fluid can contain biohazardous infectious agents. Where

exposure to potentially biohazardous materials (including

aerosol) exists, follow appropriate biosafety procedures and use

personal protective equipment such as gloves, gowns,

laboratory coats, face shields (or mask and eye protection),

respirators, and ventilation devices.

Shutting Down the Luminex

FLEXMAP 3D

Instrument

NOTE: Use the software to perform system shutdown. The shutdown

procedure is intended to shut down the Luminex

FLEXMAP 3D

instrument for short periods, for example, overnight, for a weekend,

or up to a week.

To shut down the FLEXMAP 3D instrument for a long period, see the section titled Storing

the FLEXMAP 3D Instrument.

Weekly Maintenance

NOTE: Some of the weekly maintenance tasks for the Luminex

FLEXMAP

system can be performed using available software commands.

For details about the performance of these activities, see the

Luminex

xPONENT

Software User Manual or Luminex online help.

Weekly maintenance includes using the software to perform a

weekly maintenance routine, removing clogs, cleaning the sample

probe, calibrating the system, and visually inspecting the instrument.

Running Weekly Maintenance

NOTE: Use the software to perform a weekly maintenance routine.

For research use only. Not for use in diagnostic procedures.

Maintenance and Cleaning

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 85 86

No comments

Luminex FLEXMAP 3D User Manual User Manual Page 39